Superfine water enamel
Acrylic-based water enamel, with remarkable resistance to abrasion and practically impervious to weathering and the effects of time. Particularly suitable for painting radiant elements, it ensures excellent adhesion to multiple substrates, even highly alkaline ones, such as lime plasters, concrete, metal, wood, etc. Thanks to its solvent-free composition, it can be applied to plastics and polymers such as plexiglass and similar materials.
This product complies with the HACCP protocol to protect consumer health and is certified for food use according to the UNI 11021 standard.
SUBSTRATE PREPARATION
Apply the product as it is or slightly diluted with water. If applied on wood, it's recommended to apply a coat of Idrofond (water-based cementite) and sand it down; if the substrate requires it, proceed with the application of a second coat. When applying with a brush (using short but abundant strokes), apply the first coat vertically and subsequent coats horizontally, with a 6-hour interval in between. Do not apply the product during atmospheric precipitation, under direct sunlight, or at temperatures below 43°F.
DIRECTIVE 2004/42 EC
The ready-to-use product has a maximum content of 103.00 g/l of VOC and belongs to the sub-category "Paints for interior/exterior finishes and coatings of wood and metal", whose limit value in VOC is 130 g/l .
EUH 208 – Contains 5-Chloro-2-METHYL-2H-ISOTHIAZOLE-3-ONE AND 2-METHYL-2H-ISOTHIAZOLE-3-ONE – It may produce an allergic reaction.
Data sheet
- Application
- by brush, roller, spray. (Do not apply at temperatures below 43°F.)
- Yield
- 10/14 mq/lt.
- Drying
- dry to the touch 30'-40'; in depth 4-6 hours.
- Tools cleaning
- wash with water immediately after use.
- Dilution
- ready-to-use or at most dilute with 3% of water by volume.
- Available Formats
- lt 12,5 | lt 2,5 | ml 750